# text: "Failed to download to the EZ-KIT. If no program is running, check the power and the connection, or reset the board.\n"
# item 5: CUSTOM (0x80) disabled
# bounds: x1=251 y1=251 x2=327 y2=287
# data: ""
# item 6: CUSTOM (0x80) disabled
# bounds: x1=251 y1=251 x2=327 y2=287
# data: ""
# item 7: CUSTOM (0x80) disabled
# bounds: x1=251 y1=251 x2=327 y2=287
# data: ""
# item 8: CUSTOM (0x80) disabled
# bounds: x1=251 y1=251 x2=327 y2=287
# data: ""
# item 9: CUSTOM (0x80) disabled
# bounds: x1=251 y1=251 x2=327 y2=287
# data: ""
DITL_130_Execute DITL.txt
# 5 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=129 y1=51 x2=210 y2=71
# text: "Execute"
# item 1: BUTTON (0x04) enabled
# bounds: x1=35 y1=51 x2=93 y2=71
# text: "Cancel"
# item 2: CUSTOM (0x80) disabled
# bounds: x1=120 y1=44 x2=219 y2=80
# data: ""
# item 3: EDIT_TEXT (0x10) enabled
# bounds: x1=82 y1=15 x2=216 y2=34
# text: "Edit Text"
# item 4: TEXT (0x88) disabled
# bounds: x1=12 y1=16 x2=75 y2=34
# text: "Address:"
DITL_131_# Windows DITL.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=233 y1=84 x2=291 y2=104
# text: "Okay"
# item 1: TEXT (0x88) disabled
# bounds: x1=81 y1=7 x2=291 y2=77
# text: "Close some windows before you proceed. This program handles only a limited number of windows."
DITL_132_Paste too big DITL.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=313 y1=140 x2=371 y2=160
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=71 y1=16 x2=372 y2=130
# text: "Sorry. There were too many characters for the editor in this program to paste into the text.\n\nPlease delete some text first, or select a larger range to be replaced by the pasted text."
DITL_133_Too many chars DITL.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=314 y1=120 x2=372 y2=140
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=71 y1=16 x2=372 y2=114
# text: "Sorry. There are too many characters for this editor.\n\nPlease delete some text first, or select a larger range to be replaced by the typed in text."
DITL_134_Bad open DITL.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=316 y1=121 x2=374 y2=141
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=71 y1=16 x2=372 y2=114
# text: "Unable to open “^0.”\n\nPlease ensure that it is not already in use, and that it is not in use by another application. Then try again."
DITL_135_File too big DITL.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=314 y1=125 x2=372 y2=145
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=71 y1=16 x2=371 y2=121
# text: "Sorry. “^0” is too large for the editor in this program.\n\nPlease use another editor or program to delete some text or to break the file into smaller segments first."
DITL_136_Bad EOF DITL.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=314 y1=125 x2=372 y2=145
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=71 y1=16 x2=371 y2=121
# text: "Awk!! The end of the file “^0” couldn\'t be found. The file can\'t be used by this application.\n\nPlease use a different file instead."
DITL_137_Bad Save DITL.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=314 y1=107 x2=372 y2=127
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=71 y1=16 x2=371 y2=103
# text: "“^0” was not successfully saved.\n\nTry using “Save As…” to save the file using a different name or a different disk."
DITL_138_Bad Close DITL.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=314 y1=107 x2=372 y2=127
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=71 y1=16 x2=371 y2=103
# text: "“^0” was not successfully closed.\n\nQuit this application, then inspect the file for damaged or lost data."
DITL_139_Want save DITL.txt
# 4 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=18 y1=90 x2=98 y2=110
# text: "Yes"
# item 1: BUTTON (0x04) enabled
# bounds: x1=207 y1=123 x2=287 y2=143
# text: "Cancel"
# item 2: BUTTON (0x04) enabled
# bounds: x1=18 y1=123 x2=98 y2=143
# text: "No"
# item 3: TEXT (0x88) disabled
# bounds: x1=71 y1=16 x2=285 y2=78
# text: "Do you want to save the changes you have made to “^0”?"
DITL_140_Can't write DITL.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=314 y1=155 x2=372 y2=175
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=71 y1=16 x2=371 y2=147
# text: "Unsuccessful write to “^0.”\n\nCheck to see whether the file is locked or the disk is full.\n\nQuit this application, then inspect the file for damaged or lost data."
DITL_141_Printing DITL.txt
# 0 entries
DITL_142_Print error DITL.txt
# 4 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=315 y1=256 x2=373 y2=276
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=71 y1=16 x2=371 y2=68
# text: "Unsuccessful print.\n\nCheck the following and try again."
# item 2: TEXT (0x88) disabled
# bounds: x1=89 y1=67 x2=371 y2=246
# text: "Check to see that the printer is properly set up with the Chooser.\n\nIf you are on a network, check your network connections.\n\nCheck for enough disk space to temporarily hold the print.\n\nUse Find Info to check program memory size."
# item 3: TEXT (0x88) disabled
# bounds: x1=71 y1=67 x2=90 y2=246
# text: "•\n\n\n•\n\n\n•\n\n\n•"
DITL_143_Copy, Cut, Paste DITL.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=244 y1=162 x2=302 y2=182
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=72 y1=20 x2=298 y2=152
# text: "Sorry. There has been a problem with copying, cutting, or pasting to or from the desk scrap area.\n\nTry selecting a smaller amount of text, and, for a copy or paste, ensure that you are copying a text item."
# text: "Invallid ^0: ^1\n\nMust be between ^2 and ^3.\n\n\n"
DITL_147_general ezkitapp error DITL.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=316 y1=87 x2=374 y2=107
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=73 y1=16 x2=374 y2=75
# text: "General ezkitapp error:\n\n^0 ^1.\n\n\n"
DITL_148_dump DITL.txt
# 9 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=140 y1=130 x2=198 y2=150
# text: "Dump"
# item 1: BUTTON (0x04) enabled
# bounds: x1=50 y1=130 x2=108 y2=150
# text: "Cancel"
# item 2: CUSTOM (0x80) disabled
# bounds: x1=130 y1=120 x2=207 y2=160
# data: ""
# item 3: TEXT (0x88) disabled
# bounds: x1=10 y1=20 x2=133 y2=37
# text: "Hex Startaddress:"
# item 4: EDIT_TEXT (0x10) enabled
# bounds: x1=150 y1=20 x2=225 y2=36
# text: ""
# item 5: TEXT (0x88) disabled
# bounds: x1=10 y1=50 x2=107 y2=68
# text: "Hex Length:"
# item 6: EDIT_TEXT (0x10) enabled
# bounds: x1=150 y1=50 x2=225 y2=66
# text: ""
# item 7: RADIO_BUTTON (0x06) enabled
# bounds: x1=10 y1=80 x2=160 y2=98
# text: "Program memory"
# item 8: RADIO_BUTTON (0x06) enabled
# bounds: x1=10 y1=100 x2=160 y2=117
# text: "Data memory"
DITL_149_length error DITL.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=316 y1=87 x2=374 y2=107
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=73 y1=16 x2=374 y2=75
# text: "Invallid length: ^0\n\nMust be between 000 and 600.\n\n\n"
DITL_150_fill DITL.txt
# 11 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=140 y1=159 x2=198 y2=179
# text: "Fill"
# item 1: BUTTON (0x04) enabled
# bounds: x1=50 y1=159 x2=108 y2=179
# text: "Cancel"
# item 2: CUSTOM (0x80) disabled
# bounds: x1=130 y1=149 x2=207 y2=189
# data: ""
# item 3: TEXT (0x88) disabled
# bounds: x1=10 y1=20 x2=133 y2=37
# text: "Hex Startaddress:"
# item 4: EDIT_TEXT (0x10) enabled
# bounds: x1=150 y1=20 x2=225 y2=36
# text: ""
# item 5: TEXT (0x88) disabled
# bounds: x1=10 y1=50 x2=107 y2=68
# text: "Hex Length:"
# item 6: EDIT_TEXT (0x10) enabled
# bounds: x1=150 y1=50 x2=225 y2=66
# text: ""
# item 7: RADIO_BUTTON (0x06) enabled
# bounds: x1=10 y1=109 x2=160 y2=127
# text: "Program memory"
# item 8: RADIO_BUTTON (0x06) enabled
# bounds: x1=10 y1=129 x2=160 y2=146
# text: "Data memory"
# item 9: TEXT (0x88) disabled
# bounds: x1=10 y1=80 x2=107 y2=98
# text: "Hex Value:"
# item 10: EDIT_TEXT (0x10) enabled
# bounds: x1=150 y1=80 x2=225 y2=96
# text: ""
DITL_151_PORT_DITL.txt
# 11 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=230 y1=196 x2=290 y2=216
# text: "Apply"
# item 1: BUTTON (0x04) enabled
# bounds: x1=230 y1=165 x2=290 y2=185
# text: "Cancel"
# item 2: CUSTOM (0x00) enabled
# bounds: x1=90 y1=40 x2=290 y2=56
# data: ""
# item 3: CUSTOM (0x00) enabled
# bounds: x1=90 y1=65 x2=290 y2=81
# data: ""
# item 4: CUSTOM (0x00) enabled
# bounds: x1=90 y1=90 x2=290 y2=106
# data: ""
# item 5: CUSTOM (0x00) enabled
# bounds: x1=90 y1=115 x2=290 y2=131
# data: ""
# item 6: CUSTOM (0x00) enabled
# bounds: x1=90 y1=140 x2=290 y2=156
# data: ""
# item 7: CHECKBOX (0x05) enabled
# bounds: x1=5 y1=196 x2=215 y2=216
# text: "Don\'t drop DTR when quitting"
# item 8: CUSTOM (0x80) disabled
# bounds: x1=3 y1=18 x2=298 y2=20
# data: ""
# item 9: TEXT (0x88) disabled
# bounds: x1=66 y1=0 x2=224 y2=17
# text: "Communication options"
# item 10: CUSTOM (0x80) disabled
# bounds: x1=220 y1=190 x2=297 y2=224
# data: ""
DITL_152_ERROR_DITL.txt
# 3 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=223 y1=44 x2=283 y2=64
# text: "Ok@"
# item 1: TEXT (0x88) disabled
# bounds: x1=45 y1=5 x2=283 y2=37
# text: "^0"
# item 2: ICON (0xA0) disabled
# bounds: x1=6 y1=5 x2=38 y2=37
# ICON resource ID: 129
DITL_153_MISC_DITL.txt
# 8 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=320 y1=128 x2=380 y2=148
# text: "Apply"
# item 1: BUTTON (0x04) enabled
# bounds: x1=320 y1=98 x2=380 y2=118
# text: "Cancel"
# item 2: CUSTOM (0x80) disabled
# bounds: x1=312 y1=121 x2=388 y2=157
# data: ""
# item 3: BUTTON (0x04) enabled
# bounds: x1=10 y1=30 x2=186 y2=50
# text: "Path for EZ-KIT exe files:"
# item 4: TEXT (0x88) disabled
# bounds: x1=10 y1=52 x2=395 y2=68
# text: ""
# item 5: CUSTOM (0x80) disabled
# bounds: x1=6 y1=20 x2=390 y2=22
# data: ""
# item 6: TEXT (0x88) disabled
# bounds: x1=110 y1=0 x2=292 y2=16
# text: "Miscellaneous options"
# item 7: TEXT (0x88) disabled
# bounds: x1=160 y1=82 x2=396 y2=98
# text: ""
DITL_154_About DITL co.txt
# 4 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=90 y1=217 x2=148 y2=237
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=34 y1=61 x2=205 y2=209
# text: "Macintosh Host Program \n for \n ANALOG DEVICES \n EZ-KIT Lite DSP board\n\n Version 1.0\n October, 1995\n Gerrit Polder\n <G.Polder@cpro.dlo.nl>"
# item 2: CUSTOM (0x80) disabled
# bounds: x1=81 y1=211 x2=158 y2=243
# data: ""
# item 3: PICTURE (0xC0) disabled
# bounds: x1=24 y1=6 x2=211 y2=62
# PICT resource ID: 133
DITL_160_ezkitapp general error DITL.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=316 y1=87 x2=374 y2=107
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=73 y1=16 x2=374 y2=79
# text: "^0\n^1\n^2\n^3\n\n"
DITL_250_Debugging DITL.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=150 y1=160 x2=208 y2=180
# text: "Button"
# item 1: TEXT (0x88) disabled
# bounds: x1=21 y1=94 x2=221 y2=141
# text: "“^0”\n“^1”"
DITL_4000.txt
# 12 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=280 y1=186 x2=360 y2=204
# text: "Open"
# item 1: BUTTON (0x04) enabled
# bounds: x1=59 y1=1152 x2=77 y2=1232
# text: ""
# item 2: BUTTON (0x04) enabled
# bounds: x1=280 y1=211 x2=360 y2=229
# text: "Cancel"
# item 3: CUSTOM (0x80) disabled
# bounds: x1=255 y1=88 x2=370 y2=108
# data: ""
# item 4: BUTTON (0x04) enabled
# bounds: x1=280 y1=116 x2=360 y2=134
# text: "Eject"
# item 5: BUTTON (0x04) enabled
# bounds: x1=280 y1=141 x2=360 y2=159
# text: "Drive"
# item 6: CUSTOM (0x00) enabled
# bounds: x1=12 y1=88 x2=256 y2=234
# data: ""
# item 7: CUSTOM (0x00) enabled
# bounds: x1=252 y1=88 x2=269 y2=234
# data: ""
# item 8: CUSTOM (0x80) disabled
# bounds: x1=276 y1=172 x2=364 y2=173
# data: ""
# item 9: TEXT (0x88) disabled
# bounds: x1=20 y1=1044 x2=116 y2=1145
# text: ""
# item 10: TEXT (0x88) disabled
# bounds: x1=56 y1=6 x2=372 y2=54
# text: "“^0” can’t be located. Could you find it, please?"